![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686333.webp)
Scalar i6000 Installation Guide
321
Scan Fiducials
The scan fiducials graphical report shows the results for tests of the fiducial barcode on each tape magazine
and drive sled, including the width, expected Y position (shift), and the number of hits the scanner receives
while traveling up and down. (Only known magazines are tested.)
•
If the graphical report shows a failed result for one or more tape magazines, replace the affected
magazines.
•
If there are multiple marginal or failed results, run the library alignment test (part of the installation
verification or partial frame test) to make sure the library properly aligned.
•
If the library is aligned and there are multiple marginal or failed results, the scanner should be
inspected and replaced if necessary.
Figure 33
Scan Fiducials Graphical Report
Summary of Contents for Scalar i6000
