![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686236.webp)
224
Configuring the Library
4
To assign a magazine for cleaning, click any slot in the magazine to select it. Click
Menu
, and then click
Assign magazine for cleaning
.
The magazine is assigned for cleaning. Repeat this step to assign additional cleaning magazines.
5
To import cleaning media, click the cleaning media in the I/E station to select it, and then do one of the
following:
•
To import only the selected piece of media, click
Menu
, and then click
Import <barcode number>
as cleaning media
.
•
To import all media in the selected I/E station magazine, click
Menu
, and then click
Import all tapes
in magazine as cleaning media
.
The cleaning media is moved to an available cleaning magazine, and can be used for automatic or
manual cleaning.
6
Click
Close
to close the
Drive Cleaning Configuration
dialog box.
Note
If you are working on the remote LMC, you can right-click a magazine slot or a
piece of cleaning media to see a menu of available options.
Summary of Contents for Scalar i6000
