![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_installation-manual_3548686322.webp)
310
Installation Testing and Verification
Installation Verification Test Functions
Use the
Verification Tests
dialog box to run the installation verification test and view results.
shows the parts of the
Verification Tests
dialog box. To display the dialog box, click
Tools
→
Verification
Tests
.
Figure 25
Verification Tests Dialog Box
Library Alignment Test
The library alignment test performs the following tasks:
•
Performs accessor X-axis and Y-axis travel test (also calls the FRU accessor assembly test)
•
Calibrates library and checks calibration offsets by comparing them to the default values for the
drives and I/E stations
•
Checks magazine offsets
•
Checks collected offset alignments for magazines, I/E stations, and drive sleds
•
Checks joint alignment quality
test results area
selected test
start/stop test
display test logs
close window
view Help window
test report output
library inventory
drive inventory
blade inventory
refresh window
Summary of Contents for Scalar i6000
