Scalar i2000 Installation Guide
305
25
The
Aisle Light Settings
dialog box appears.
26
Initially to turn the lights on you must choose either
30 minutes
or
1 Hour.
If you choose
Always Off
the aisle lights will not come on.
27
Click
OK
.
See the
Scalar i6000 User’s Guide
for more information concerning aisle lights.
28
Visually verify all the aisle lights in your system are on. You can view the aisle lights either through the
top filter of each access door or you can look down the aisle of the system via the side windows.
29
Open and close any I/E station and verify that the aisle lights shut off automatically when the robot scans
the I/E station.
Summary of Contents for Scalar i6000
