Quantum DXi8500 User Manual Download Page 278

Page: 278 / 520

Chapter 7: DXi8500 Status
DXi Accent Status

248

Quantum DXi8500 User’s Guide

DXi Accent Status

Use the

Accent Status

page to view information about recent DXi

Accent activity.

Note:

The

Accent Status

page displays only if DXi Accent is currently

enabled or was previously enabled (see

DXi Accent

page 343).

To access the

Accent Status

page, click the

Status

menu, and then click

the

Accent

tab (see

Figure 141

Figure 141 Accent Status Page

The

Accent

section displays the following information about DXi Accent

activity in the previous minute:

•

Media Server To DXi Previous Minute

- DXi Accent activity for all

Accent enabled media servers.

•

Inline (Accent)

- The inline data flow throughput (in MB/s).

Inline data flow represents the original, native size of the data

protected by the DXi.

•

Ethernet In (Accent)

- The amount of data received by all

Ethernet ports (in MB/s). This amount represents the reduced

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands