manualshive.com logo in svg

Quantum DXi8500, User Manual

Share
Download
Quantum DXi8500 User Manual Download Page 442

Chapter 9: DXi8500 Configuration
Notifications

412

Quantum DXi8500 User’s Guide

•

Available

 - Sends a trap when the system transitions from an 

unavailable to an available state.

•

Unavailable

 - Sends a trap when the system transitions from an 

available to an unavailable state.

4

Click 

Apply

.

Editing a Destination

Edit an SNMP destination to change the name of the destination or the 

types of traps the DXi8500 sends to the destination.
To edit a destination:

1

Click 

Edit

.

The 

Edit Trap Destination

 page displays (see 

Figure 229

).

Figure 229  Edit Trap 
Destination Page

2

Enter information about the destination:

Note:

If you are editing a destination, you cannot change the 

IP 

Address

.

•

IP Address

 - (Optional) Select a different destination to edit.

•

Name

 - Enter the name of the destination.

3

Select one or more traps to send to the destination:

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands