Quantum DXi8500 User Manual Download Page 207

Page: 207 / 520

Chapter 6: DXi8500 Replication

Send NAS

Quantum DXi8500 User’s Guide

177

•

Queued

- The synchronization job is queued and will continue when

the system is ready.

•

Success

- The synchronization job was completed successfully.

•

Recovering

- The recover operation is in process.

•

Replicating

- The replication operation is in process.

•

Failed

- The synchronization job was not completed.

Enabling Replication

For a Share

Enable replication for a NAS share to allow the share's data to be

replicated to another DXi system (the target). Disable replication if you

do not want to replicate the share's data to another DXi system.

Note:

To be eligible for replication, a share must have data

deduplication enabled at the time it is created.

To enable or disable replication for a share:

Select the share and click

Edit

The

Edit NAS Share

page displays (see

Figure 101

Figure 101 Edit NAS Share
Page

Select the

Enable replication

check box to enable replication for

the share.

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands