Quantum DXi8500 User Manual Download Page 222

Page: 222 / 520

Chapter 6: DXi8500 Replication
Receive NAS

192

Quantum DXi8500 User’s Guide

Figure 106 Received
Snapshots Page

Use the

Received Snapshots

page to perform the following tasks:

• View information about received snapshots (see

Snapshots List

page 192).

• Recover a share on the target system (see

Recovering a Share

page 193).

• Failback a share to the source system (see

Performing a Failback For

a Share

on page 194).

• Delete a received snapshot (see

Deleting a Snapshot

on page 196).

Note:

The target system will retain up to 10 replication snapshots

(default setting) for each replicated share. Once 10 snapshots

have been saved, the oldest snapshot is deleted to make room

for each new snapshot that is received. (To change the

maximum number of snapshots retained for each share, see

Replication Receive

on page 312).

Snapshots List

The

Snapshots List

displays all available snapshots that have been

received from configured replication sources. Snapshots are grouped by

NAS share. To see all available snapshots for a share, click the plus icon

[+]

next to the share name.

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands