manualshive.com logo in svg

Quantum DXi8500, User Manual

Share
Download
Quantum DXi8500 User Manual Download Page 223

Chapter 6: DXi8500 Replication

Receive NAS

Quantum DXi8500 User’s Guide

193

The 

Snapshots List

 displays the following information about each 

snapshot:

•

Share Name

 - The name of the share.

•

Source DXi

 - The hostname of the system that the snapshot was 

sent from.

•

Started

 - The time the most recent replication job was started.

•

Finished

 - The time the most recent replication job finished.

•

Status

 - The status of the most recent replication job (see 

Replication and Synchronization Status

 on page 176). Click the 

status to display detailed information about the most recent 

replication job. 

Note:

Click a column heading to sort the rows in the table by that 

column. Click the column heading again to reverse the sort 

order.

Recovering a Share

Recover a NAS share if the source system is unavailable and you need to 

access the share (for example, to continue performing backups). When 

you recover a share, you select a received snapshot. The DXi8500 uses 

the snapshot to recreate the share on the target system just as it was at 

the point in time when the snapshot was saved.

Note:

Before recovering a share, you must enable CIFS on the DXi (see 

Windows Domain

 on page 271). Also, if the DXi is not using 

Active Directory, you must configure at least one workgroup 

user to own recovered CIFS shares (see 

Share Access

 on 

page 274).

To recover a share:

1

On the target system, select a snapshot in the 

Snapshots List

 and 

click 

Recover

.

The 

Recovered Share Name

 page displays (see 

Figure 107

).

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands