Quantum DXi8500, User Manual, Page: 103 / 520

Chapter 2: Basic Operations
DXi8500 Components and Operations
Quantum DXi8500 User’s Guide 73
Table 20 Fibre Channel Switch
LED Patterns (1TB and 2TB)
LED Name LED Color Status of Hardware Recommended Action
Power Supply
Status (right)
No light Primary power cord is
disconnected or is not actively
powered, or power supply has
failed.
Verify the power supply is on
and seated and the power cord
is connected to a functioning
power source.
Steady green Power supply is operating
normally.
No action required.
Power Status No light System is off or there is an
internal power supply failure.
Verify the system is on. If the
system is on, the unit is faulty.
Contact Technical Support.
Steady green System is on and power supplies
are
functioning properly.
No action required.
System Status No light System is off, boot is not
complete, or boot failed.
Verify the system is on and has
completed booting.
Steady green System is on and power supplies
are functioning properly.
No action required.
Steady
amber (for
more than
five seconds)
Boot failed, the system is faulty. Perform the following steps:
• Connect a serial cable to the
system.
• Reboot the system.
• Check the failure indicated on
the system console.
• Contact Technical Support.
Flashing
amber/green
Attention is required. A number
of variables can cause this status
including a single power supply
failure, a fan failure, or one or
more environmental ranges has
exceeded.
Check the management
interface and the error log for
details on the cause of status.
Contact Technical Support if
required.