Quantum DXi8500, User Manual

Page: 337 / 520

Chapter 9: DXi8500 Configuration
VTL
Quantum DXi8500 User’s Guide 307
Note: To delete a host that is no longer needed, click Delete next to
the host. You cannot delete a host of it is currently assigned to
a host access group.
Targets
Use the Targets page to view the current target (Fibre Channel)
configuration.
To access the
Targets page, on the Host Access page, click the Targets
tab (see Figure 173 ).
Figure 173 Targets Page
The Targets page displays the Target Port and WWPN for the currently
configured targets. The Backpanel Locations section displays a
graphical representation of the Fibre Channel and Ethernet ports as they
appear on the rear of the system.
Note: A mapped (green) status indicates the host is currently logged
on to one or more Fibre Channel target ports.
Select one or more targets and click Reset Target(s) to initiate a Fibre
Channel reset on the selected ports. A reset causes the ports to go
through LIP (Loop Initialization Protocol).