manualshive.com logo in svg

Quantum DXi8500, User Manual

Share
Download
Quantum DXi8500 User Manual Download Page 143

Chapter 4: DXi8500 Configuration Wizards

NAS Wizard

Quantum DXi8500 User’s Guide

113

Note:

You cannot use the NAS wizard to edit existing shares. For 

more information about working with NAS shares, see 

NAS

 on 

page 264.

To begin the 

NAS

 wizard, on the 

Wizards

 menu, click 

NAS

.

Step 1: About

1

Read the information about the wizard (see 

Figure 62

).

2

Click 

Next

 to continue.

Note:

At any time while using the wizard, you can click 

Previous

 to 

return to the previous step.

Figure 62  NAS Wizard: About

Step 2: Protocol

1

Select the type of host the DXi8500 will present NAS shares to (see 

Figure 63

):

•

Windows (CIFS)

 - All hosts that will interact with the DXi8500 

run Windows.

•

UNIX/Linux (NFS)

 - All hosts that will interact with the DXi8500 

run UNIX or Linux.

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands