Quantum DXi8500 User Manual Download Page 180

Page: 180 / 520

Chapter 4: DXi8500 Configuration Wizards
Support Wizard

150

Quantum DXi8500 User’s Guide

Figure 92 Support Wizard:
System Log

Step 5: Licensed

Features

Add a license key to enable new functionality on the DXi8500. To install

a license key, you must first obtain a License Certificate containing an

authorization code.
Contact your Quantum sales representative to purchase a license. After

you purchase the license, you will receive a License Certificate

containing an authorization code.

Note:

Some licenses are pre-installed on the DXi8500. Also, License

Certificates for some licenses are included with the DXi8500.

For more information about licensed features, see

License Keys

on page 438.

Select the DXi system serial number (displayed under

Enable

Licensed Features

) and press

<Ctrl+C>

to copy it (see

Figure 93

Click the link for

Quantum’s License Key Management

site.

The

License Key Management

page displays.

Click to place the cursor in the

Serial Number

box and press

<Ctrl+V>

to paste the DXi system serial number.

Click

Submit

The

Licensed Feature

page displays.

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands