Quantum DXi8500, User Manual

Page: 406 / 520

Chapter 9: DXi8500 Configuration
System
376 Quantum DXi8500 User’s Guide
Click Delete to remove IP address information for the selected
interface. Or click Undo to revert all current IP Address Table
changes to the last update.
Note:
When you add a network interface, a default route (via the
default gateway) is automatically created for the interface after
network settings are applied and the DXi reboots. For example,
if you add an interface with IP address 10.20.185.172, a route
with the destination IP address 10.20.185.0 is automatically
added. If you delete the default route, it is automatically added
again the next time network settings are applied and the DXi
reboots. For more information about interface routing, see
Understanding Interface Routing on page 378.
Configuring Interface Routing
Some network configurations require that you specify routing details for
an interface. You need to specify routing details if the host or client the
interface connects to is on a different subnet that is not reachable using
the default gateway. You also need to specify routing details if you have
configured multiple network segments (replication, data, or
management) on the same subnet. For more information and examples,
see Understanding Interface Routing on page 378.
Under
IP Address Configuration > Routing Details
, enter routing
information for one or more interfaces (see Figure 209 ):
Figure 209 Network Page:
Routing Details
1 In the IP Address Table (above routing details), select an interface
to add or modify routing data. (To select an interface, click the radio
button next to the interface index name, for example, bond0:2 .)
After selecting an interface in the IP Address Table , the Routing
Details table below expands to display available routes (if any).
Note: A maximum of 8 routes per interface are allowed.
2 If necessary, click the Show link to show the routing details table.