Quantum DXi8500 User Manual Download Page 261

Page: 261 / 520

Chapter 7: DXi8500 Status

Hardware

Quantum DXi8500 User’s Guide

231

Figure 129 FC Switches Page

The

FC Switches

section displays the following information about each

Fibre Channel switch:

•

Component

- The name of the Fibre Channel switch.

Click the name of the Fibre Channel switch to view detailed

information for the switch in the

Details

section.

•

Status

- The status of the switch.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

The

Details

section displays the following information about the

components in the selected Fibre Channel switch:

•

Component

- The name of the component.

•

Type

- The component type (Fibre Channel port, Temperature sensor,

Fan, or Power Supply Unit).

•

Value

- The value reported by the sensor or component.

•

Status

- The status of the component.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands