Quantum DXi8500, User Manual

Page: 382 / 520

Chapter 9: DXi8500 Configuration
PTT
352 Quantum DXi8500 User’s Guide
FC Initiators and
Targets
The FC Initiators & Targets page allows you to see all path to tape
initiator and target ports and their associated World Wide Port Numbers
(WWPNs). You can also change a Fibre Channel port to initiator or target
mode.
To access the
FC Initiators & Targets
page, on the
PTT
page, click the
FC
Initiators & Targets tab (see Figure 198 ).
Figure 198 FC Initiators and
Targets Page
Use the FC Initiators & Targets page to perform the following tasks:
• View information about initiator and target Fibre Channel ports (see
Fibre Channel Initiators and Targets List on page 352).
• Change the mode of a Fibre Channel port (see Editing the Fibre
Channel Port Type on page 353).
Fibre Channel Initiators and Targets List
The Fibre Channel Initiators & Targets section displays the following
information for all Fibre Channel ports:
• Alias - The alias of the Fibre Channel port.
• WWPN - The World Wide Port Number of the Fibre Channel Port.
To change the port type, select
the port and click Edit