![background image](http://html1.mh-extra.com/html/quantum/dxi8500/dxi8500_user-manual_3787717113.webp)
Chapter 2: Basic Operations
Powering on the DXi8500 System
Quantum DXi8500 User’s Guide
83
Note:
Do NOT turn on any of the Array modules until all of the
Expansion modules have been powered on. After all of the
Expansion modules have been powered on, wait at least 2
minutes before continuing to
Step 5
.
Figure 44 Turning on the
Expansion Modules (2TB)
Figure 45 Turning on the
Expansion Modules (3TB)
5
Turn on both power switches on the back of each Array module (see
Figure 46
and
Figure 47
).
The Array modules take approximately 2 minutes to initialize.
During this time, the Array module will spin up all attached
Expansion modules. When the initialization is complete, all drive
sled LEDs are green on both the Array modules and Expansion
modules. Make sure that the Array module lights indicate the
correct speed.
Expansion module power switches
Expansion Module Power Switches
Summary of Contents for DXi8500
