Quantum DXi8500, User Manual

Page: 300 / 520

Chapter 9: DXi8500 Configuration
NAS
270 Quantum DXi8500 User’s Guide
Note: To modify the users that are available in the
Workgroup User list, see Share Access on page 274.
Note: After you add a user or host to the access list, you
cannot change their permissions. Instead, select the
user or host in the access list and click Delete to
remove them from the list. Then add the user or host
again with the correct permissions.
3 (Optional) Under Replication Settings , specify replication settings.
For more information about configuring replication for a share, or
to set up replication for the share at a later time, see DXi8500
Replication on page 165.
4 Click Apply .
Note: If you modify a NAS share that uses the CIFS protocol, you
must restart the CIFS service for the changes to take effect. To
restart the CIFS service, first disjoin the Windows workgroup,
then join it again (see Windows Domain on page 271).
Restarting the CIFS service will close all active connections to
the share. Most Windows workstations will automatically
reconnect, but some applications may be affected.
Deleting a NAS Share
Delete a NAS share if it is no longer needed. When you delete a share, all
data stored on the share is lost, and any schedules associated with the
share are deleted.
Note: If you delete a share configured for Directory/File Based
Replication on the source DXi, the share is
not
automatically
deleted on the target DXi. If you do not want to retain the
share on the target DXi, you can manually delete it.
To delete a NAS share:
1
Select the share and click
Delete
.
Note:
You can select multiple shares to delete at once.