Quantum DXi8500 User Manual Download Page 263

Page: 263 / 520

Chapter 7: DXi8500 Status

Hardware

Quantum DXi8500 User’s Guide

233

•

Component

- The name of the component.

•

Type

- The component type (Ethernet port, Temperature sensor, Fan,

or Power Supply Unit).

•

Value

- The value reported by the sensor or component.

•

Status

- The status of the component.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

•

- (Green) The port is connected.

•

Down

- (Green) The port is not connected.

Firmware Version

The

Firmware Version

page allows you to view information about

hardware components installed in the DXi8500, such as the firmware

version, hardware revision, and manufacturer.
To access the

Firmware Version

page, on the

Hardware

page, click the

Firmware Version

tab (see

Figure 131

Figure 131 Firmware Version
Page

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands