Quantum DXi8500 User Manual Download Page 172

Page: 172 / 520

Chapter 4: DXi8500 Configuration Wizards
Email Alerts Wizard

142

Quantum DXi8500 User’s Guide

Email Alerts Wizard

The

Email Alerts

wizard provides guided assistance for configuring the

DXi8500 to automatically send notifications and reports to selected

recipients. The wizard helps you configure an outgoing e-mail server.

Then the wizard guides you through the process of specifying e-mail

recipients and selecting the notifications and reports to send to the

recipients.

Note:

For more information about sending e-mail alerts, see

page 399.

To begin the

Email Alerts

wizard, on the

Wizards

menu, click

Email

Alerts

Step 1: About

Read the information about the wizard (see

Figure 85

Click

Next

to continue.

Note:

At any time while using the wizard, you can click

Previous

return to the previous step.

Figure 85 Email Alerts Wizard:
About

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands