Quantum DXi8500 User Manual Download Page 188

Page: 188 / 520

Chapter 5: DXi8500 Home Page
Replication Overview

158

Quantum DXi8500 User’s Guide

from Directory/File or Cartridge Based Replication, or incoming data

from Failback replication.

•

Shares & Partitions

- The amount of data stored on the DXi via

local I/O. This includes incoming data from Directory/File or

Cartridge Based Replication, and incoming data from Failback

replication.

•

OST Storage Servers

- The amount of data stored in deduplicated

OpenStorage (OST) storage servers. This includes incoming data for

OST and DXi Accent.

•

Deduplication Ratio

- The deduplication ratio of all data that has

been processed by the data deduplication engine.

•

Compression Ratio

- The compression ratio of all data that has

been processed by the compression engine.

Figure 97 Data Reduction
Statistics Overview

Replication Overview

The

Replication

overview on the

Home

page (see

Figure 98

) displays

the following information about target and source replication activity:

•

Status

- The replication status of the DXi8500.

•

Ready

- (Green) The system is ready to perform replication.

•

In Progress

- (Blue) A replication job is currently in progress.

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Brands by name

Popular brands