Quantum DXi8500 User Manual Download Page 259

Page: 259 / 520

Chapter 7: DXi8500 Status

Hardware

Quantum DXi8500 User’s Guide

229

Storage Arrays

The

Storage Arrays

page allows you to view information about storage

arrays and controllers in the DXi8500.
To access the

Storage Arrays

page, on the

Details

page, click the

Storage Arrays

tab (see

Figure 128

Figure 128 Storage Arrays
Page

The

Storage Arrays

section displays the following information about

each storage array:

•

Component

- The name of the storage array.

Click the name of the storage array to view detailed information for

the array in the

Component

section.

•

Status

- The status of the storage array.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

The

Components

section displays the following information about the

components in the selected storage array:

•

Component

- The name of the component.

Summary of Contents for DXi8500









































































































































































































































































































































































































































































































































Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands

Quantum DXi8500, User Manual

Search results

Summary of Contents for DXi8500

Reviews:

Related manuals for DXi8500

Brands by name

Popular brands