Quantum DXi8500, User Manual

Page: 276 / 520

Chapter 7: DXi8500 Status
VTL
246 Quantum DXi8500 User’s Guide
Figure 139 Logical View Page
The
Partitions
section displays the following information about VTL
partitions:
• Partition - The name of the partition.
• Number of Drives - The number of virtual tape drives in the
partition.
• Capacity - The storage capacity of the partition.
• Used - The amount of space on all cartridges in the partition
currently used to store data. The value for Used might be less than
the original, native (raw) data size because the data is compressed
before it is written to the media.
• Used Percent - The amount of currently used space on all cartridges
in the partition expressed as a percentage of the total capacity
( [ Used / Capacity ] x 100 ).
Note:
Click the
Information
button
[i]
next to a partition to display
detailed information about the partition.
Performance View
Use the Performance View page to view information about the
throughput of VTL partitions. You can also view performance for virtual
tape drives.