It is always recommended to anchor down the unit to the ground. Drill
through the four holes in each of the base of the unit using 6mm dia
masonry drill to a depth of 70mm. Screw in the anchor fixings. (These
have a self cutting thread). If not anchoring the unit, fit the self seal plugs
BEFORE BUILDING to block the fixing holes from underneath. Please
note, product must be bolted down to comply with LPS1175
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
GLADIATOR PLUS 2
ZSCREW32
x16
ZSILCOL1
x3
ZSCREW04
x4
ZSCREW100
x515
ZSCREW340
x24
32670
x26
10 mm
Spanner
18V
ZCOMPPLZS02
x16
ZCOMPPLAS22-23-24
x24
8x 2mm, 8x 3mm, 8x 5mm
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 2410mm x 4940mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
ROOF BRACE 39897
x3
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: Please keep
this key card safe! Refer
to if replacement key is
required.
x2
Warning: some panels may weigh over
20Kg. Beware of manual handling
SEALANT
00001
YOUR UNIQUE
KEY CODE
FRONT
BASE PNL
39841
x1
TOP
COVER CHANNEL
40063
x6
FLOOR COVER CHANNEL
40062
x6
FASCIA
39848
x1
RH DOOR
32944
x1
RH FRONT
P
ANEL
039861
x1
LH FRONT
P
ANEL
39860
x1
LH DOOR
32943
x1
RH FR
T SIDE P
ANEL
39815
x1
SIDE COVER CHANEL
32916
x6
LH FR
T SIDE P
ANEL
39814
x1
RH FR
T TOP
PANEL
39873
x1
LH FR
T TOP
PNL
39871
x1
LONG T
OP CAP
39893
x1
SHOR
T TOP
CAP
39892
x1
EXTENSION T
OP CAP
40095
x2
RH EXT
TOP
PNL
40066
x2
LH EXT
TOP
PNL
40065
x2
RH REAR
TOP
PANEL
39869
x1
LH REAR
TOP
PNL
39867
x1
ROOF JOINT
STRIP
40881
x6
LH BACK P
ANEL
39832
x1
LH REAR SIDE P
ANEL
32874
x1
RH REAR SIDE P
ANEL
32875
x1
REAR BASE PNL
39831
x1
RH BACK P
ANEL
39833
x1
TOP
FRONT
BACK CHANNEL
40094
x4
LH EXT
SIDE P
ANEL
32853
x2
RH EXT
SIDE P
ANEL
32854
x2
EXT
BASE P
ANEL
40064
x2
6mm
Dia.
Posi-Driv
Screwdriver
All manuals and user guides at all-guides.com