Quantum Data 881, User Manual

Page: 975 / 1144

882 Video Test Instrument User Guide (Rev A.35) 597
XISH:TTYP
Image SHift Trace TYPe
Class Image Shift
Description Establishes the way in which image shifting will occur. A repeating trace type causes the
image to shift between the start and end points, and then restart at the start point. A
reverse trace type causes the image to shift between the start and end points, and then
from the end point to the start point. If an imageshift editing session is in progress (the
ISHB command was issued), the trace type will be changed, but not applied to the
hardware until the ISHE and ISHU commands are issued. Otherwise, the command will
take effect immediately.
Command syntax XISH:TTYP type
type
1 = Repeat
2 = Reverse
Query syntax XISH:TTYP?
Query response 1 or 2
Example 1
XISH:TTYP 1 //Sets the trace type to 1, Repeat.
Example 2
XISH:TTYP? //Queries for current trace type.
1
Related commands ISHA , ISHB , ISHE , ISHG , ISHK , ISHL , ISHN , ISHP , ISHQ? , ISHS , ISHU , XISH:HINC ,
XISH:PATH , XISH:SRCN , XISH:TINC , XISH:VINC