Quantum Data 881 User Manual Download Page 158

Page: 158 / 1144

146

Chapter 5

Working with Formats

Overview

The generator contains a library of standard formats. You can create your own formats,

however, either by using the Format Editor or by entering format commands through the

command line interface. You can also create format catalogs which allow you to control

the formats that appear on the generator’s display when you press the

Source

key.

This chapter describes the format library and provides procedures for using the

generator’s front panel keys, the command line interface, and the format editor to view

formats, create and customize formats, and create format catalogs.

The following functions are described in this chapter:

•

Viewing the Source list of formats.

You can view the Source list of formats using the

front panel or the command line interface.

•

Creating formats.

You can create new formats through the format editor or the

command line interface.

•

Viewing and modifying format parameters.

You can view and edit format parameter

values either through the format editor, the front panel, the command line interface, or

by editing the format XML file.

•

Configuring the Source list.

You can edit the

Source

list of formats to include only

those formats you use.

Summary of Contents for 881

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands

Quantum Data 881, User Manual

Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands