Quantum Data 881 User Manual Download Page 317

Page: 317 / 1144

882 Video Test Instrument User Guide (Rev A.35)

305

8:DOLBY(AC3), 2.0, 48000.00 [2khz2ch-0dB_ac3.pcm]

9:DOLBY(EAC3), 2.0, 192000.00 [1khz2ch-20dB_ec3.pcm]

10:DOLBY(EAC3), 5.1, 192000.00 [1khz51ch-20dB_ec3.pcm]

11:DOLBY(EAC3), 7.1, 192000.00 [1khz71ch-1frame_ec3.pcm]

12:DOLBY(TRUEHD), 7.1, 192000.00 [1khz71ch-20dB_mlp.pcm]

13:DOLBY(TRUEHD), 2.0, 192000.00 [nxt2ch2s.mlp.pcm]

CAUD

// Sends a 2 channel Dolby AC3 clip with 192kHz sampling rate

at 0dB out the HDMI output.

4. Enable and view image versions to select the other audio formats as follows:

Press the

Options

key. The following menu appears on the 882’s display:

Choose the

More

item by pressing the adjacent soft key until a + and Rendition

appears next to the item.

Press the + and - keys to advance through the image versions to change the audio

intensity.

Note: Depending on the selected image, pressing the + and - keys will change the

amplitude or frequency of the HDMI audio output.

Alternatively, to enable and view an image version using the command line interface,

enter the following commands:

ISUB

// Enables sub images

IVER

// Specifies the first image version

IMGU

// Activates the image version

5. To verify proper HDMI audio handling, check the following on the HDMI display:

•

Audio is output from the proper channels (left, right, or both).

•

The proper audio format is shown on the Audio/Video receiver.

Testing HDMI audio using an external audio source

The 882 enables you to inject audio signals from an external SPDIF source (such as a

DVD player) into the HDMI content stream. You can input IEC 61937 non-linear PCM

encoded audio stream or compressed audio streams (for example AC-3 and DTS) into the

SPDIF interface for output through the HDMI Tx connector.

-More
Red+
-NoGamma

Green+

-Noise

Blue+

+More Rendition: 000
Red+
-NoGamma

Green+

-Noise

Blue+

Summary of Contents for 881

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands

Quantum Data 881, User Manual

Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands