ProteOn XPR36, User Manual

Page: 8 / 288

ProteOn XPR36 System |
vi
In the event of a fluid leak, turn off all power to the system and disconnect all
power cords. Contact Bio-Rad Laboratories for further information.
U
NINTERRUPTIBLE
P
OWER
S
UPPLY
An uninterruptible power supply is recommended to protect the ProteOn
XPR36 from an unstable main power source, harmful spikes, surges or total
blackouts.
This table contains minimum specifications for an uninterruptible power
supply that can be used with the ProteOn instrument.
M
ECHANICAL
S
AFETY
Use caution when handling the needle tips; they are sharp.
Keep fingers clear of the autosampler during operation.
Shut down the instrument and turn off the power before handling
the autosampler arm, needle holder, or needles.
B
IOLOGICAL
S
AFETY
All human and animal samples may contain hazardous infectious
agents. Follow appropriate biosafety procedures when handling
these products and their containers.
Observe all local, state, and federal biohazard handling
regulations when disposing of biohazardous waste material.
Specification 120 VAC 230 VAC
Output power capacity 1,500 VA 1,500 VA
Nominal input voltage 120 V 230 V
Backup time Minimum 15 min at full load Minimum 15 min at full load