ProteOn XPR36, User Manual

Page: 100 / 288

ProteOn XPR36 | Experiments
82
To run an experiment:
1. Prepare the instrument and chip following the instructions in
Experiment Preparation on page 64.
2. Select a protocol to run using the Selected Protocol/Experiment pull-
down list in the Run tab.
3. In the Run tab, click Start. The instrument status changes from Ready
to Running. During the experiment run, the data for the current step
appear on the Run screen. The experiment stops when it reaches the
end of the last protocol step. The Run screen shows data in progress.
Following is an example of a protocol in progress with sensorgrams
showing.
4. (Optional) Click Stop to suspend a protocol temporarily. The experiment
finishes the current step and the instrument status changes to Ready.
As each step finishes, you can view its data on the Data screen. When an
experiment is running, the Data Analysis wizards and Analysis Report
functions are enabled for all loaded experiments. The Protocol Report and
Autosampler Layout reports remain enabled. You can analyze data when an
experiment is running.