ProteOn XPR36, User Manual

Page: 172 / 288

ProteOn XPR36 | Maintenance
154
Maintenance Wizard Instructions
Prime
This wizard primes the entire fluidics system. Run it when changing buffer
solutions or filling the fluids system. Priming takes approximately 7 min. Use
an MNT chip and the Prime button on the Instrument Maintenance screen of
ProteOn Manager software.
To prime the system:
1. Load the running buffer.
2. Click Prime on the Instrument Maintenance screen of ProteOn Manager
software.
3. Follow the prompts in the wizard.
Weekly
The Weekly wizard removes stubborn residues from the entire fluidics system.
The Weekly wizard takes approximately 2.5 hr to run. Use an MNT chip.
To run the weekly wizard:
1. Click Weekly on the Instrument Maintenance screen of ProteOn
Manager software.
2. The following solutions are required:
Solution 1: Maintenance Solution 1, 2% Contrad 70
Solution 2: Maintenance Solution 2, 70% isopropyl alcohol (70%
absolute alcohol can be substituted)
Solution 3: DDW rinse
Solution 4: Fresh DDW
3. Place all buffer inlet lines in Solution 1 (0.5% SDS) to start.
4. Follow the wizard prompts, placing buffer lines into each solution when
requested by the wizard.
5. The system remains in DDW when the maintenance procedure is
finished.