ProteOn XPR36, User Manual

Page: 63 / 288

Editing Protocol Sample Details
45
Sample Panel Browser
The Sample Panel browser on the Samples screen shows the following for
each sample panel.
• Rack/Plate ID — displays an identification number
assigned to the rack or microplate. Racks and plates appear in the
order they are created
• Panel Name — shows the user-defined name
for the sample panel
• Required Volume — displays the minimal sample volume required
in each vial/well of the panel. The required volume is calculated as
follows:
Where:
TubeDeadVol = 25 μl
DeadVol = 35 μl
InjectQual = 1, 2, or 3
PlugVol = 8 μl
n WhereUsed or n = the number of steps that use the sample panel
• Where Used — lists the protocol steps that use the panel. This
information does not appear until a sample panel is linked to a
protocol step. (This information is automatically populated when
linked to a step.)
• Type — determines the type of protocol step a sample panel is
linked to and how the data associated with the panel are filtered on
the Data screen. It also determines the direction of the sample