ProteOn XPR36, User Manual

Page: 54 / 288

ProteOn XPR36 System | Protocol Design
36
To create a protocol from rack/plate contents:
1. Select the Protocol tab, and then select the Samples screen.
2. In the Step Creation area, select Create Protocol. The Create Protocol
From Samples dialog box appears, in which you can build a cycle of
steps.
3. In the Take samples from drop-down list, select the rack or plate that is
the source of the samples.
4. If you make no other changes in this dialog box and click Create, a
cycle of the three steps, in the order of the tabs, is added to the
protocol Steps list.
To repeat an injection or block:
• You can change the number of times to repeat an injection by
specifying the number in the Repeat Injection box in the Create
Protocol From Samples dialog box. Specifying zero in the Repeat
Injection box omits the step type from a cycle of steps
• You can change the number of times to repeat a block by
specifying the number in the Repeat block box. A block repeats the
steps for each analyte, so you can create a cycle of steps and a
replicate of that cycle of steps