ProteOn XPR36, User Manual

Page: 41 / 288

ProteOn XPR36 Instrument
23
Status Bar Instrument State Messages
As ProteOn Manager software communicates with the ProteOn XPR36
instrument, the status bar at the bottom of the main window shows the
current instrument state. The messages identify the operation the instrument
is performing. When no instrument is connected, the instrument state is
Inactive.
I
NACTIVE
S
TATE
In the Inactive state, there is no communication between the software and the
instrument. Either the instrument has not yet been turned on or it has not
finished initial startup operations.
Note: You must turn on the ProteOn XPR36 instrument before
starting ProteOn Manager software. If the software is started
when the instrument is not connected or is powered down, the
state remains Inactive. All instrument operations are disabled in
the Inactive state.
When the instrument is turned on, the software checks to see whether it
needs to recover after a long-term shutdown and run the appropriate protocol.
At the end of this process, the state changes to Power Up.
Key Component LEDs
LED
Steady
Green
Flashing
Green
Steady
Amber
Flashing
Amber
Steady
Red
Instrument
Status Ongoing
experiment
Initializing Standby state Inactive state Fault state
Chip
Temperature Within
tolerance
— — Stabilizing Control error
Autosampler
Temperature Within
tolerance
— — Stabilizing Control error
Autosampler
Status Autosampler
ready
Arm moving — Loading
problem
Error
Experiment
Status Instrument
ready
Protocol
running
— Pausing state —