ProteOn XPR36, User Manual

Page: 33 / 288

Installing ProteOn Manager Software
15
If you upgrade from ProteOn Manager v. 3.0 or from v.3.0.1 and you have
previously run the optimizer, your database is already optimized and there is
no need to run the optimizer again during upgrade to ProteOn Manager v. 3.1.
The optimizer reconfigures the database to improve data access time and
allow the data to run to the full storage capacity of the hard disk.
Optimizing a large database can take a considerable amount of time. The
optimizer displays a time estimate and prompts you to choose whether or not
to run it. The optimizer can be run at any time, and it will optimize the
database only once. However, the optimizer cannot run when ProteOn
Manager or any other ProteOn utilities that affect the database are running.
To run the Database Optimizer after the installation process, select it on the
Start menu under ProteOn Manager software.
To upgrade ProteOn Manager Version 2.1.n, v. 3.0, or v. 3.0.1 to ProteOn
Manager Version 3.1:
Note: The Windows 7 operating system might display requests
for permission to perform some activities during the installation
process. You must approve these requests to complete
installation.
Note: If your database is already optimized, installation requires a
free space of at least the size of the database. If your database is
not yet optimized, getting the new application installed along with
optimizing the database requires a free space of at least double
the size of the database.
1. Insert the ProteOn Manager software 3.1 CD-ROM into a CD drive.
2. If the CD does not AutoStart and displays the following screen, double-
click the file CDBrowserStart.exe. The Proteon Manager software
splash screen appears.