Omron 8U0108-E1-01, User Manual

Page: 45 / 333

XtraDrive User Manual Chapter 3: Wiring
3-21
!
Output Circuit Interfaces
Any of the following three types of servo amplifier output circuits can
be used. Connect an input circuit at the host controller following one of
these types.
•
Connecting to a Line-driver Output Circuit
Encoder serial data converted to two-phase (A and B phase) pulse
output signals (PAO, /PAO, PBO, /PBO), origin pulse signals (PCO,
/PCO) and S phase rotation signals (PCO, /PCO) are output via line-
driver output circuits that normally comprise the position control
system at the host controller. Connect the line-driver output circuit
through a line receiver circuit at the host controller.
See
3.5 Wiring Encoders
for connection circuit examples.
•
Connecting to an Open-collector Output Circuit
Alarm code signals are output from open-collector transistor output
circuits.
Connect an open-collector output circuit through an optocoupler,
relay, or line receiver circuit.
Note:
The maximum allowable voltage and current capacities for open-collector circuits are:
•
Voltage: 30V
DC
•
Current: 20mA
DC