![background image](http://html1.mh-extra.com/html/omron/8u0108-e1-01/8u0108-e1-01_user-manual_742062028.webp)
XtraDrive User Manual
Chapter 3: Wiring
3-4
3.1.2. Single-Phase 0.8kW 200V Main Circuit Specifications
XtraDrive
XD-08-MS
has been changed from three-phase specifications to single-
phase. Main circuit connection terminals (
L1
,
L2
,
L3
) remained.
These devices have terminal
B3
and internal regenerative resistor. Observe the
following points.
1. Connect main power supply shown below to
L1
and
L3
terminals. Power supply is
single-phase, 220 to 230 VAC +10% to –15%, 50/60Hz. If power supply of 187V
(-15% of 220V) or less is used, alarm A.41 indicating voltage shortage, may occur
when accelerating to max speed with max torque of motor.
2. Short-circuit
B2
and
B3
terminals using the internal regenerative resistor. If
capacity of the regenerative resistor is insufficient, remove the lead between
B2
and
B3
terminals and connect an external regenerative resistor unit to
B1
and
B2
terminals.
Summary of Contents for 8U0108-E1-01
