Omron 8U0108-E1-01, User Manual

Page: 124 / 333

XtraDrive User Manual Chapter 5 : Parameter Settings and Functions
5-56
Specify the Stop mode as one of these options.
Pn001.0 Setting Result
0
Uses the dynamic brake to stop the servomotor.
Maintains dynamic brake after the servomotor stops.
*
1
Uses the dynamic brake to stop the servomotor.
Releases dynamic brake after the servomotor stops, and the servomotor
coasts to a stop.
2
Coasts the servomotor to a stop.**
The servomotor is turned OFF and motion stops due to equipment friction.
Note: * If the servomotor is stopped or moving at extremely low speed, it will coast to a stop.
** When the main power supply is turned OFF for the following servo amplifiers, the DB circuit is
turned ON when the control power supply is OFF:
30 to 1500W for 200V
2.0 to 3.0kW for 400V
If the DB circuit needs to be turned OFF when the main power supply or the control power supply is
OFF, disconnect the servo amplifier’s wiring (U, V, and W).
Note: The dynamic brake is an emergency stop function. Do not repeatedly start and stop the servomotor
using the servo ON signal (/S-ON) or by repeatedly turning power ON and OFF.
Note:
The dynamic brake (DB) is a common way of quickly stopping a
servomotor by electrically shorting its electrical windings.
The DB circuit is incorporated into the servo amplifier.
5.4.3. Using the Zero Clamp Function
Zero Clamp Function
The zero clamp function is used for systems where the host controller
does not form a position loop for the speed reference input. In other
words, this function is used to stop and lock the servomotor even when
the input voltage of speed reference V-REF is not 0V. An internal
position loop is temporarily formed to clamp the servomotor within one
pulse when the zero clamp function is turned ON. Even if the
servomotor is forcibly rotated by external force, it will still return to the
zero clamp position.