manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Wireless Configuration 6 - 55

Figure 6-24

WLAN - WLAN QoS Policy screen - Rate Limit tab

6. Configure the following intended 

Upstream Rate Limit 

parameters for the selected WLAN:

Enable

Select this radio button to enable rate limiting for data transmitted from access point 
radios to associated clients on this WLAN. Enabling this option does not invoke rate 
limiting for data traffic in the downstream direction. This feature is disabled by default.

Rate

Define an upstream rate limit from 50 - 1,000,000 kbps. This limit constitutes a threshold 
for the maximum number of packets transmitted or received over the WLAN (from all 
access categories). Traffic exceeding the defined rate is dropped and a log message is 
generated. The default setting is 5000 kbps.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

CAME Z Series Manual preview
Z Series
Brand: CAME Pages: 4
EAW MX8600 Jumpstart Manual preview
MX8600
Brand: EAW Pages: 6
EAW UX8800 Technical Note preview
UX8800
Brand: EAW Pages: 6
Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23
Netopia 3346-ENT Getting Started Manual preview
3346-ENT
Brand: Netopia Pages: 38
Hama HDD Silenser Bedienungsanleitung preview
HDD Silenser
Brand: Hama Pages: 12
TP-Link VIGI NVR1008 Quick Installation Manual preview
VIGI NVR1008
Brand: TP-Link Pages: 2
DPtech LSW3003 Series Manual preview
LSW3003 Series
Brand: DPtech Pages: 39
KPN MIK820 Quick Start Manual preview
MIK820
Brand: KPN Pages: 14
LSI MegaRAID SCSI 320-2X Quick Installation Manual preview
MegaRAID SCSI 320-2X
Brand: LSI Pages: 4
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Brand: TP-Link Pages: 7
Xyclop XC-4CH-NVR-1TB User Manual preview
XC-4CH-NVR-1TB
Brand: Xyclop Pages: 144
Silvertel Ag102 User Manual preview
Ag102
Brand: Silvertel Pages: 9
ACTi LPR-100 Quick Installation Manual preview
LPR-100
Brand: ACTi Pages: 14

Brands by name

Popular brands

Load more brands