manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Wireless Configuration 6 - 89

7. Select 

OK

 to update the MeshConnex Configuration settings for this policy. Select 

Reset

 to revert to the last saved 

configuration.

8. Select the 

Security 

tab.

Mesh Point Status

To enable this mesh point, select the 

Enabled

 radio button. To disable the mesh point 

select the 

Disabled

 button. The default value is enabled.

Mesh QoS Policy

Use the drop-down menu to specify the mesh QoS policy to use on this mesh point. This 
value is mandatory. If no suitable Mesh QoS policies exist, click the create icon to create 
a new Mesh QoS policy.

Beacon Format

Use the drop-down menu to specify the format that beacons from the mesh point are sent. 
To use access point style beacons select 

access-point

 from the drop-down menu. To use 

mesh point style beacons select 

mesh-point

 from the drop-down menu. The default value 

is mesh-point.

Is Root

Select this option to specify the mesh point as a root.

Control VLAN

Use the spinner control to specify a VLAN to carry mesh point control traffic. The valid 
range for control VLAN is from 1 - 4094. The default value is VLAN 1.

Allowed VLAN

Specify the VLANs allowed to pass traffic on the mesh point. Separate all VLANs with a 
comma. To specify a range of allowed VLANs separate the starting VLAN and the ending 
VLAN with a hyphen.

Neighbor Inactivity 
Timeout

Specify a Neighbor Inactivity Timeout in 

seconds

, 

minutes

, 

hours

 or 

days

, up to a 

maximum of 1 day. 

Neighbor Inactivity Timeout

 is the allowed amount of time between 

frames received from a neighbor before their client privileges are revoked. The default 
value is 2 minutes.

Description

Enter any descriptive text about the mesh point.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 66
BandLuxe R500 Series User Manual preview
R500 Series
Brand: BandLuxe Pages: 67
ebm-papst 4112 N/2HU Operating Manual preview
4112 N/2HU
Brand: ebm-papst Pages: 6
ebm-papst 4314 N/2HHPU Operating Manual preview
4314 N/2HHPU
Brand: ebm-papst Pages: 6
ebm-papst 8312 L Operating Manual preview
8312 L
Brand: ebm-papst Pages: 5
I-O Wireless WBC11 User Manual preview
WBC11
Brand: I-O Wireless Pages: 55
S&T kontron KBox E-420-R1K/V1K User Manual preview
kontron KBox E-420-R1K/V1K
Brand: S&T Pages: 82
Ace ADSL2+ Wireless MIMO Router User Manual preview
ADSL2+ Wireless MIMO Router
Brand: Ace Pages: 64
Bitspower BPTA-CPUMS-V2-SKA Instruction Manual preview
BPTA-CPUMS-V2-SKA
Brand: Bitspower Pages: 6
Patton electronics IPLink 2803 Specifications preview
IPLink 2803
Brand: Patton electronics Pages: 2
3Com 3C433279A Release Note preview
3C433279A
Brand: 3Com Pages: 12
BIIZZY zoomno MSC-5578 Setup Instructions preview
zoomno MSC-5578
Brand: BIIZZY Pages: 2
Softing TH LINK Installation Manual preview
TH LINK
Brand: Softing Pages: 16
Starbridge Networks ADSL Ethernet & USB Combo Router Lynx L-510 User Manual preview
ADSL Ethernet & USB Combo Router Lynx L-510
Brand: Starbridge Networks Pages: 59
Alcatel-Lucent 1353 Brochure preview
1353
Brand: Alcatel-Lucent Pages: 12
Teridian 71M6533 Quick Start Manual preview
71M6533
Brand: Teridian Pages: 2
Wave wifi MBR Series Quick Start Manual preview
MBR Series
Brand: Wave wifi Pages: 3
Linksys WAG120N Datasheet preview
WAG120N
Brand: Linksys Pages: 2

Brands by name

Popular brands

Load more brands