manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Network configuration 7 - 41

Figure 7-26

Network - Alias - Network Service Alias Add screen

6. If adding a new

 Network Service Alias

,

 provide it a name up to 32 characters.

7. Within the 

Range

 field, use the 

+ Add Row

 button to specify the 

Start IP

 address and 

End IP 

address for the service alias 

range or double-click on an existing service alias range entry to edit it.

8. Select 

OK

 when completed to update the network service alias rules. Select 

Reset 

to revert the screen back to its last 

saved configuration.

NOTE: 

The 

Network Service Alias Name

 always starts with a dollar sign ($). 

Protocol 

Specify the protocol for which the alias has to be created. Use the drop down to select the 
protocol from 

eigrp, gre, icmp, igmp, ip, vrrp, igp, ospf, tcp

 and

 udp

. Select 

other

 if the protocol 

is not listed. When a protocol is selected, its protocol number is automatically selected. 

Source Port 
(Low and High)

Note: 

Use this field only if the protocol is 

tcp

 or 

udp

.

Specify the source ports for this protocol entry. A range of ports can be specified. Select the 

Enter Range

 button next to the field to enter a lower and higher port range value. Up to eight 

(8) such ranges can be specified.

Destination Port
(Low and High)

Note: 

Use this field only if the protocol is 

tcp

 or 

udp

.

Specify the destination ports for this protocol entry. A range of ports can be specified. Select 
the 

Enter Range

 button next to the field to enter a lower and higher port range value. Up to eight 

(8) such ranges can be specified.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

ABB i-bus KNX IPR/S 3.5.1 Product Manual preview
i-bus KNX IPR/S 3.5.1
Brand: ABB Pages: 44
Vanguard 340 Installation Manual preview
340
Brand: Vanguard Pages: 121
B2 ABB2050 Instruction Manual preview
ABB2050
Brand: B2 Pages: 52
IBA Com-L2B-4-8 Manual preview
Com-L2B-4-8
Brand: IBA Pages: 29
SeaLevel 7406e User Manual preview
7406e
Brand: SeaLevel Pages: 17
H3C S12500R-2L Installation Manual preview
S12500R-2L
Brand: H3C Pages: 77
ekwb EK-FB GA AX370 Gaming RGB Monoblock Installation Manual preview
EK-FB GA AX370 Gaming RGB Monoblock
Brand: ekwb Pages: 2
Telex Communications 2472AA Instruction Manual preview
2472AA
Brand: Telex Communications Pages: 28
TP-Link TL-SG2424P User Manual preview
TL-SG2424P
Brand: TP-Link Pages: 176
XJTAG XJLink2-CFM User Manual preview
XJLink2-CFM
Brand: XJTAG Pages: 9
Xilinx Zynq-7000 Manual preview
Zynq-7000
Brand: Xilinx Pages: 8
Lantech IMR-3003 User Manual preview
IMR-3003
Brand: Lantech Pages: 40
AirTies Air 4240 User Manual preview
Air 4240
Brand: AirTies Pages: 28
JUMO 705041 Installation Instructions Manual preview
705041
Brand: JUMO Pages: 60
Medel RONDO 3 Quick Manual preview
RONDO 3
Brand: Medel Pages: 28
Idis DR-1500 Series Quick Manual preview
DR-1500 Series
Brand: Idis Pages: 17
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Brand: Planet Pages: 16
Idis DR-6308P Quick Manual preview
DR-6308P
Brand: Idis Pages: 20

Brands by name

Popular brands

Load more brands