manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Statistics   13 - 67

13.3.7 Wireless LANs

Access Point Statistics

The 

Wireless LANs 

screen displays an overview of access point WLAN utilization. This screen displays access point WLAN 

assignment, SSIDs, traffic utilization, number of radios the access point is utilizing on the WLAN and transmit and receive 
statistics. 

To review a selected access point’s WLAN statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its 

connected access points.

3. Select 

Wireless LANs

.

Role

Lists the client’s defined role within the access point managed network.

Client Identity

Displays the unique identity of the listed client as it appears to its adopting access point.

Vendor

Displays the name of the client vendor (manufacturer).

Band

Displays the 802.11 radio band on which the listed wireless client operates.

AP Hostname

Displays the administrator assigned hostname of the access point to which this access point 
is adopted.

Radio MAC

Displays the MAC address of the radio which the wireless client is using.

WLAN

Displays the name of the WLAN the access point's using with each listed client. Use this 
information to determine if the client's WLAN assignment best suits its intended deployment 
in respect to the WLAN's QoS objective.

VLAN

Displays the VLAN ID each listed client is currently mapped to as a virtual interface for access 
point interoperability.

Last Active

Displays the time when this wireless client was last seen (or detected) by a device within the 
access point managed network.

Disconnect Client

Select a specific client MAC address and select the 

Disconnect Client

 button to terminate this 

client’s connection to its access point.

Refresh

Select the 

Refresh 

button to update the screen's statistics counters to their latest values.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Baracoda All in One Printer Communication Protocol Manual preview
All in One Printer
Brand: Baracoda Pages: 42
D-Link DXS-3610-54S Quick Installation Manual preview
DXS-3610-54S
Brand: D-Link Pages: 38
D-Link DWL-3150 Install Manual preview
DWL-3150
Brand: D-Link Pages: 8
D-Link DSS-8+ Manual preview
DSS-8+
Brand: D-Link Pages: 22
D-Link DSS-5+ Manual preview
DSS-5+
Brand: D-Link Pages: 20
D-Link DSS-24+ Technical Specifications preview
DSS-24+
Brand: D-Link Pages: 2
D-Link DSS-24+ Manual preview
DSS-24+
Brand: D-Link Pages: 16
D-Link DI-804V Quick Install Manual preview
DI-804V
Brand: D-Link Pages: 12
D-Link DIR-615 - Wireless N Router Installation Manual preview
DIR-615 - Wireless N Router
Brand: D-Link Pages: 13
D-Link Cobra DSL-5300 User Manual preview
Cobra DSL-5300
Brand: D-Link Pages: 124
D-Link Web Smart DES-1210-28P Selection Manual preview
Web Smart DES-1210-28P
Brand: D-Link Pages: 6
D-Link 2Voice + 4SW VoIP Router DVG-1402S User Manual preview
2Voice + 4SW VoIP Router DVG-1402S
Brand: D-Link Pages: 57
D-Link xStack Storage DSN-4000 Series Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 23
D-Link Express EtherNetwork DI-604 Brochure preview
Express EtherNetwork DI-604
Brand: D-Link Pages: 7
D-Link xStack Storage DSN-4000 Series Cli User'S Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 97
D-Link SharePort DIR-825 Quick Start Manual preview
SharePort DIR-825
Brand: D-Link Pages: 2
D-Link Amplifi DIR-645 Quick Installation Manual preview
Amplifi DIR-645
Brand: D-Link Pages: 28
Panasonic WJ-NV200K Quick Reference Manual preview
WJ-NV200K
Brand: Panasonic Pages: 4

Brands by name

Popular brands

Load more brands