manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

5 - 334 WiNG 5.5 Access Point System Reference Guide 

Figure 5-215

Device Overrides - Advanced Profile MINT screen - IP (Add) 

25. Set the following 

Link IP

 parameters to complete the MINT network address configuration:   

IP

Define or override the IP address used by peer access points for interoperation when 
supporting the MINT protocol.

Routing Level

Use the spinner control to define or override a routing level of either 1 or 2.

Listening Link

Specify a listening link of either 0 or 1. UDP/IP links can be created by configuring a 
matching pair of links, one on each end point. However, that is error prone and doesn’t 
scale. So UDP/IP links can also listen (in the TCP sense), and dynamically create 
connected UDP/IP links when contacted.

Port

To specify a custom port for MiNT links, select this option and use the spinner control 
to define or override the port number from 1 - 65,535.

Forced Link

Select this option to specify the MiNT link as a forced link. This setting is disabled by 
default. 

Link Cost

Use the spinner control to define or override a link cost from 1 - 10,000. The default 
value is 100.

Hello Packet Interval

Set or override an interval in either 

Seconds

 (1 - 120) or 

Minutes

 (1 - 2) for the 

transmission of hello packets. The default interval is 15 seconds.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

LAWO edge User Manual preview
edge
Brand: LAWO Pages: 154
National Instruments NI 9265 Operating Instructions Manual preview
NI 9265
Brand: National Instruments Pages: 26
National Instruments NI 9203 User Manual And Specifications preview
NI 9203
Brand: National Instruments Pages: 85
National Instruments Module SCXI-1503 User Manual preview
Module SCXI-1503
Brand: National Instruments Pages: 79
Intel NetStructure ZT 5515 Product Specification preview
NetStructure ZT 5515
Brand: Intel Pages: 90
Tandberg Data Storagelibrary T24 Manual preview
Storagelibrary T24
Brand: Tandberg Data Pages: 28
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
Roland VP-9000 Turbostart preview
VP-9000
Brand: Roland Pages: 2
Realtek RTL8187SE User Manual preview
RTL8187SE
Brand: Realtek Pages: 30
Allied Telesis AR725 Quick Start Manual preview
AR725
Brand: Allied Telesis Pages: 22
Thermalright AXP-100H MUSCLE Manual preview
AXP-100H MUSCLE
Brand: Thermalright Pages: 36
SAGEMCOM SE681 WiMAX User Manual preview
SE681 WiMAX
Brand: SAGEMCOM Pages: 75
Roland Super Sound Set SR-JV80-07 Owner'S Manual preview
Super Sound Set SR-JV80-07
Brand: Roland Pages: 8
Schrack Technik HSERG245GS Instruction Sheet preview
HSERG245GS
Brand: Schrack Technik Pages: 2
AMX NXA-ENET8POE Installation Manual preview
NXA-ENET8POE
Brand: AMX Pages: 2
Marani LPP-440A User Manual preview
LPP-440A
Brand: Marani Pages: 39
Cameo WLG-1801 User Manual preview
WLG-1801
Brand: Cameo Pages: 23
Techroutes TSR 2800-30 Hardware Installation Manual preview
TSR 2800-30
Brand: Techroutes Pages: 20

Brands by name

Popular brands

Load more brands