manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

Services Configuration

9 - 9

12. Set the following 

Data Limit

 parameters:

13. Set the following 

Logout FQDN

 parameters:

14. Refer to the 

Destination Ports for Redirection

 item, and enter destination ports (separated by commas, or using a dash 

for a range) for consideration when re-directing client connections. Standard ports 80 and 443 are always considered for 
client connections regardless of what is entered by the administrator.

15. Select 

OK

 to save the changes made within the Basic Configuration screen. Select 

Reset

 to revert to the last saved 

configuration.

16. Select the 

Web Page

 tab to create HTML pages requesting wireless clients use to login and navigate within the captive 

portal.

The 

Login

 page displays by default.

Syslog Host

When syslog accounting is enabled, use the drop-down menu to determine whether an

 IP 

address 

or a

 host name

 is used as a syslog host. The IP address or hostname of an external 

server resource is required to route captive portal syslog events to that destination.

Syslog Port

When syslog accounting is enabled, define the numerical syslog port to route traffic with the 
external syslog server. The default port is 514.

Limit

Select the option to enable limiting usage. Use the spinner to set a maximum usage limit in 
megabytes.

Action

Use the drop-down to configure the action to be taken once the data limit is reached. Choose 
from one of:

•

Log only

 – Logs the event

•

log-and-disconnect

 – Logs the event and disconnects the user.

Logout FQDN

Configure the 

fully qualified domain name

 (FQDN) of the domain where the user will be 

redirected after logging out of the captive portal.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Brand: 3Com Pages: 26
DataRemote CDS-9010 Quick Start Manual preview
CDS-9010
Brand: DataRemote Pages: 2
GAMDIAS Aura GC2 Quick Installation Manual preview
Aura GC2
Brand: GAMDIAS Pages: 15
Aleratec 310108 Quick Start Manual preview
310108
Brand: Aleratec Pages: 12
Stanwax Laser S4i Manual preview
S4i
Brand: Stanwax Laser Pages: 9
Intellinet 523318 Instructions preview
523318
Brand: Intellinet Pages: 2
RAK RAK3372 Quick Start Manual preview
RAK3372
Brand: RAK Pages: 30
ZALMAN CNPS6500B-AlCu User Manual preview
CNPS6500B-AlCu
Brand: ZALMAN Pages: 4
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
ZALMAN RESERATOR1 V2 Installation And Operational Manual preview
RESERATOR1 V2
Brand: ZALMAN Pages: 18
S&T Kontron SMARC-sXEL User Manual preview
Kontron SMARC-sXEL
Brand: S&T Pages: 108
Bailey INFI 90 NTAI06 Instruction preview
INFI 90 NTAI06
Brand: Bailey Pages: 33
H3C SecPath F1070 Manual preview
SecPath F1070
Brand: H3C Pages: 68
Oracle Acme Packet 3900 Hardware Installation And Maintenance Manual preview
Acme Packet 3900
Brand: Oracle Pages: 70
Dolby Laboratories Digital Loudspeaker Brochure preview
Digital Loudspeaker
Brand: Dolby Laboratories Pages: 4
Renesas R0E424270CFLE0 User Manual preview
R0E424270CFLE0
Brand: Renesas Pages: 4
Allied Telesis Routers and Switches Datasheet preview
Routers and Switches
Brand: Allied Telesis Pages: 15

Brands by name

Popular brands

Load more brands