Motorola AP-7131 Series, Reference Manual

Page: 560 / 954

7 - 32 WiNG 5.5 Access Point System Reference Guide
23. Set the following AAA TACACS Authentication server configuration parameters:
24. Set the following AAA TACACS Authorization server configuration parameters:
Server Preference Specifies how an accounting server is selected from the server pool for sending
accounting requests. Select one of the following:
• NONE – No preference in selection of server used for accounting.
• authenticated-server-host – Prefers the same server host used as the authentication
server.
• authenticated-server-number – Prefers the server with the same index as used as the
authentication server. For example, if the index of the server used for authentication
server was one (1), then use the accounting server with the index one (1).
• authorized-server-host – Prefers the server host used as the authorization server.
• authorized-server-number – Prefers the server with the same index as used as the
authorization server. For example, if the index of the server used for authorization server
was one (1), then use the accounting server with the index one (1).
Authentication Failure Select to enable accounting for authentication failure.
CLI Commands Select to enable accounting for CLI commands.
Session Select to enable accounting for session start and session stop events.
Authentication Access
Method Specify the access methods for authentication.
• all – Authentication is performed for all types of access.
• console – Authentication is performed only for console access
• ssh – Authentication is performed only for access through SSH.
• telnet – Authentication is performed only for access through Telnet
• web – Authentication is performed only for access through the Web interface.
Directed Request Select to enable the AAA TACACS authentication server to be used with the
‘@<servername>’ nomenclature. The specified server must be present in the list of
defined Authentication servers.
Authorization Access
Method Specify the access methods for authorization:
• all – Authorization is performed for all types of access.
• console – Authorization is performed only for console access
• ssh – Authorization is performed only for access through SSH.
• telnet – Authorization is performed only for access through Telnet
Server Specifies how an authorization server is selected from the server pool:
• NONE – No preference in selection of server used for accounting.
• authenticated-server-host – Prefer the same server host used as the authentication
server.
• authenticated-server-number – Prefer the server with the same index as used as the
authentication server. For example, if the index of the server used for authentication
server was one (1), then use the authorization server with the index one (1).