manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

6 - 38 WiNG 5.5 Access Point System Reference Guide 

6.1.7 Configuring Client Load Balancing

Wireless LANs

Client load balance settings can be defined generically for both the 2.4 GHz and 5.0 GHz bands, and specifically for either of 
the 2.4 GHz or 5.0 GHz bands.

To configure client load balancing settings on an access point managed WLAN:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Wireless.

3. Select 

Wireless LANs

 to display a high level display of existing WLANs.

4. Select the

 Add

 button to create an additional WLAN, or 

Edit

 to modify the properties of an existing WLAN.

5. Select 

Client Load Balancing

.

Figure 6-17

WLAN - Client Load Balancing screen

6. Set the following 

Load Balance Settings

 generic to both the 2.4 GHz and 5.0 GHz bands:

Enforce Client Load 
Balancing

Select this radio button to enforce a client load balance distribution on this WLAN. This 
setting is disabled by default.

Loads are balanced by ignoring association and probe requests. Probes and association 
requests are not responded to, forcing a client to associate with another access point.

Band Discovery Interval

Define a value in either 

Seconds 

(0 - 10,000), 

Minutes

 (0 -166) or 

Hours 

(0 -2) the access 

point uses to discover a client’s band capabilities before associating. The default is 10 
seconds.

Capability Ageout Time

Define a value in either 

Seconds 

(0 - 10,000), 

Minutes 

(0 -166) or 

Hours 

(0 -2) to ageout a 

client’s capabilities from the access point’s internal table. The default is 1 hour.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
PACOM Professional Series Quick Manual preview
Professional Series
Brand: PACOM Pages: 15
Dahua DHI-NVR5224-24P-4KS2 Quick Start Manual preview
DHI-NVR5224-24P-4KS2
Brand: Dahua Pages: 24
E-Lins H900 Series User Manual preview
H900 Series
Brand: E-Lins Pages: 59
E-Lins H750 Quick Start Manual preview
H750
Brand: E-Lins Pages: 11
E-Lins H700 Series Quick Start Manual preview
H700 Series
Brand: E-Lins Pages: 9
E-Lins H685 Series Quick Start preview
H685 Series
Brand: E-Lins Pages: 5
e-Line Technology Network Video Recorders User Manual preview
Network Video Recorders
Brand: e-Line Technology Pages: 34
N-Tron 7018 User Manual & Installation Manual preview
7018
Brand: N-Tron Pages: 138
Ubiquiti airFiber AF-5X User Manual preview
airFiber AF-5X
Brand: Ubiquiti Pages: 50
Z3 Technology Z3-DM8168-PCI-RPS Manual preview
Z3-DM8168-PCI-RPS
Brand: Z3 Technology Pages: 20
Z3 Technology Z3-DM8107-SDI2-RPS User Manual preview
Z3-DM8107-SDI2-RPS
Brand: Z3 Technology Pages: 75
Z-Wave USB Dongle User Manual preview
USB Dongle
Brand: Z-Wave Pages: 13
Navini Networks RIPWAVE 40-00460-00R User Manual preview
RIPWAVE 40-00460-00R
Brand: Navini Networks Pages: 35
Supero Supero SAS-826A User Manual preview
Supero SAS-826A
Brand: Supero Pages: 16
protech ProX-1695 User Manual preview
ProX-1695
Brand: protech Pages: 95
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Brand: Lucent Technologies Pages: 20
H3C NIC-FC730i-Mb-2-32G Manual preview
NIC-FC730i-Mb-2-32G
Brand: H3C Pages: 37

Brands by name

Popular brands

Load more brands