manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

3 - 26 WiNG 5.5 Access Point System Reference Guide 

•

DNS Forwarding

 - Select this option to allow a DNS server to translate domain names into IP addresses. If this 

option is not selected, a primary and secondary DNS resource must be specified. DNS forwarding is useful when a 
request for a domain name is made but the DNS server, responsible for converting the name into its corresponding 
IP address, cannot locate the matching IP address. 

•

Primary DNS

 - Enter an IP Address for the main Domain Name Server providing DNS services for the access point's 

LAN interface.

•

Secondary DNS

 - Enter an IP Address for the backup Domain Name Server providing DNS services for the access 

point's LAN interface

2. Select 

Next

. The 

Advanced Setup Wizard

 displays the 

Radio Configuration

 screen to set the access point's radios. For more 

information, see 

Radio Configuration on page 3-29

.

If 

Router Mode

 is selected as the 

Network Topology

, then the 

Advanced Setup Wizard

 displays the WAN configuration 

screen. For more information, see 

WAN Configuration on page 3-13

.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

Paradyne 3163 Quick Reference preview
3163
Brand: Paradyne Pages: 16
3xLogic V250 Quick Start Manual preview
V250
Brand: 3xLogic Pages: 2
Barco EX Safety Manual preview
EX
Brand: Barco Pages: 100
Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
Yamaha EMP100 Supplementary Manual preview
EMP100
Brand: Yamaha Pages: 4
Enginko MCF-LW06424 Operating Manual preview
MCF-LW06424
Brand: Enginko Pages: 19
Lancom GS-2310P Instruction Manual preview
GS-2310P
Brand: Lancom Pages: 25
NA DigiNet 416 User Manual preview
DigiNet 416
Brand: NA Pages: 22
Endace DAG 7.1S User Manual preview
DAG 7.1S
Brand: Endace Pages: 51
Avaya ERS 5510 Technical Configuration Manual preview
ERS 5510
Brand: Avaya Pages: 73
ATI Technologies RADEON 9800 PRO Getting Started Manual preview
RADEON 9800 PRO
Brand: ATI Technologies Pages: 20
NCR 7702-K134 Upgrade Manual preview
7702-K134
Brand: NCR Pages: 15
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
CAME 848EA-0120 Setup And User'S Manual preview
848EA-0120
Brand: CAME Pages: 32
LevelOne NetCon FBR-1409TX User Manual preview
NetCon FBR-1409TX
Brand: LevelOne Pages: 88
Idis DR-2308P Quick Manual preview
DR-2308P
Brand: Idis Pages: 18
TANDBERG 240LTO Quick Start Manual preview
240LTO
Brand: TANDBERG Pages: 2
ADS Technologies API-800 Installation Manual preview
API-800
Brand: ADS Technologies Pages: 21

Brands by name

Popular brands

Load more brands