Statistics 13 - 97
4. Refer to the
General
field to assess the
Monitor Interval
used to poll for updates from critical resources and the
Source
IP For Port-Limited Monitoring
of critical resources.
The access point
Critical Resource
screen displays the following:
13.3.18 LDAP Agent Status
Access Point Statistics
When LDAP has been specified as an external resource (as opposed to local access point RADIUS resources) to validate PEAP-
MS-CHAP v2 authentication requests, user credentials and password information needs to be made available locally to
successfully connect to the external LDAP server. Up to two LDAP Agents (primary and secondary external resources) can be
defined as external resources for PEAP-MS-CHAP v2 authentication requests.
AP6511 and AP6521 model access point do not support this feature in Standalone AP or Controller AP mode. However, AP6511
and AP6521 models are supported when adopted and managed by a controller or service platform.
For more information on setting LDAP agents as part of the RADIUS server policy, see
Configuring the RADIUS Server on page
9-35
.
To view access point LDAP agent statistics:
1. Select the
Statistics
menu from the Web UI.
2. Select
System
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
connected access points.
3. Select
LDAP Agent Status
.
Critical Resource
Name
Lists the name of the critical resource monitored by the access point. Critical resources are
device IP addresses on the network (gateways, routers etc.). These IP addresses are critical to
the health of the network. These device addresses are pinged regularly by access points. If
there’s a connectivity issue, an event is generated stating a critical resource is unavailable.
Via
Lists the VLAN used by the critical resource as a virtual interface. The critical resource displays
as a link than can be selected to list configuration and network address information in greater
detail.
Status
Defines the operational state of each listed critical resource VLAN interface (either
Up
or
Down
).
Error Reason
Provides an error status as to why the critical resource is not available over its designated
VLAN.
Mode
Displays the operational mode of each listed critical resource.
Refresh
Select the
Refresh
button to update the screen’s statistics counters to their latest values.
Summary of Contents for AP-7131 Series
