manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

5 - 332 WiNG 5.5 Access Point System Reference Guide 

15. Select 

MINT Protocol.

 The MINT Protocol screen displays the 

Settings

 tab by default.

Figure 5-213

Device Overrides - Advanced Profile Overrides MINT screen - Settings tab

16. Refer to the 

Area Identifier

 field to define or override the Level 1 and Level 2 Area IDs used by the profile’s MINT 

configuration.

17. Define or override the following 

Priority Adjustment

 settings:

18. Select the 

Latency of Routing Recalculation 

option (within the 

Shortest Path First

 (SPF) field) to enable the spinner 

control used for defining or overriding a latency period from 0 - 60 seconds. The default setting has the option disabled.

Max confirmed 
Neighbors 

Use the spinner to set the maximum number of learned neighbors stored at this device.

Minimum signal 
strength for smart-rf 
neighbors

Use the spinner to set the minimum signal strength of neighbor devices that are learnt 
through Smart RF before being recognized as neighbors.

Level 1 Area ID

Select this option to enable a spinner control for setting the Level 1 Area ID from 1 - 
4,294,967,295. The default value is disabled.

Designated IS Priority 
Adjustment

Use the spinner control to set a 

Designated IS Priority Adjustment

 setting from -255 - 

+255. This is the value added to the base level DIS priority to influence the 

Designated 

IS 

(DIS) election. A value of +1 or greater increases DISiness. The default setting is 0.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

H3C S3100 Series Operation Manual preview
S3100 Series
Brand: H3C Pages: 1057
National Instruments NI 5922 Calibration Procedure preview
NI 5922
Brand: National Instruments Pages: 28
National Instruments NI 9219 Getting Started preview
NI 9219
Brand: National Instruments Pages: 19
National Instruments NI 9219 Operating Instructions Manual preview
NI 9219
Brand: National Instruments Pages: 36
National Instruments NI 6711 User Manual preview
NI 6711
Brand: National Instruments Pages: 103
National Instruments NI PXI-1042 Series Installation Manual preview
NI PXI-1042 Series
Brand: National Instruments Pages: 12
National Instruments PCI-1407 Setup And Operation preview
PCI-1407
Brand: National Instruments Pages: 4
Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Ratoc Systems SmartMedia Adapter PC Card REX-SMA01F Product Manual preview
SmartMedia Adapter PC Card REX-SMA01F
Brand: Ratoc Systems Pages: 75
Lanner ICS-P570 User Manual preview
ICS-P570
Brand: Lanner Pages: 63
National Instruments PCI-6110E/6111E User Manual preview
PCI-6110E/6111E
Brand: National Instruments Pages: 113
JETWAY HBJC924R3288DG2NS Series Quick Installation Manual preview
HBJC924R3288DG2NS Series
Brand: JETWAY Pages: 6
ZyXEL Communications XS1920 Series User Manual preview
XS1920 Series
Brand: ZyXEL Communications Pages: 422
IBM System Storage DS3200 Overview preview
System Storage DS3200
Brand: IBM Pages: 2
Advantech PCM-4141 Series User Manual preview
PCM-4141 Series
Brand: Advantech Pages: 96

Brands by name

Popular brands

Load more brands