Motorola AP-7131 Series, Reference Manual

Page: 538 / 954

7 - 10 WiNG 5.5 Access Point System Reference Guide
3. Select Add to create a new L2TP V3 policy, Edit to modify the attributes of a selected policy or Delete to remove obsolete
policies from the list of those available.
Figure 7-6
L2TP V3 Policy Creation
screen
4. If creating a new L2TP V3 policy, assign it a Name up to 31 characters in length. Remember, a single L2TP V3 policy can be
used by numerous L2TP V3 tunnels.
5. Define the following Policy Details to add a device to a list of devices sanctioned for network operation:
Force L2 Path Recovery Indicates if L2 Path Recovery is enabled to learn servers, gateways and other network
devices behind a L2TPV3 tunnel.
Cookie size L2TP V3 data packets contain a session cookie which identifies the session (pseudowire)
corresponding to it. Use the spinner control to set the size of the cookie field present within
each L2TP V3 data packet. Options include 0, 4 and 8. The default setting is 0. If using the CLI,
cookie size cannot be configured per session, and are the same size for all sessions with in a
tunnel.
Hello Interval Define an interval in either Seconds (1 - 3,600), Minutes (1 -60) or Hours (1) between L2TP V3
hello keep alive messages exchanged within the L2TP V3 control connection. The default
setting is 1 minute.