manualshive.com logo in svg

Motorola AP-7131 Series, Reference Manual

The Motorola AP-7131 Series offers exceptional wireless connectivity and advanced features. To maximize your experience, be sure to download the Product Reference Manual - a comprehensive and essential guide to help you utilize all of its capabilities. Access this valuable resource for free on our website and unlock the full potential of your Motorola AP-7131 Series.

Share
Download
background image

5 - 286 WiNG 5.5 Access Point System Reference Guide 

Figure 5-179

VPN Step-By-Step Wizard - Step 1

3. Define the following:

4. Click the 

Next

 button to go to Step 2. 

Tunnel Name

Provide a name for the tunnel in the 

Tunnel Name

 field.

Tunnel Type

Select the tunnel type being created. Two types of tunnels can be created. 

Site to Site

 is used 

to create a tunnel between two remote sites as indicated in the image. 

Remote Access

 is used 

to create a tunnel between an user device and a network as indicated in the image.

Interface

Select the interface to use. Interface can be a 

Virtual LAN (VLAN) 

or 

WWAN

 or 

PPPoE

 

depending on the interfaces available on the device.

Traffic Selector (ACL)

This field creates the 

Access Control List

 (ACL) that is used to control who uses the network. 

Provide the 

Source

 and 

Destination

 IP address ranges with their net mask. Click the 

Add Rule

 

button to add the rule into the ACL.

Summary of Contents for AP-7131 Series



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131 Series

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
hawa HAWA-Frontside 60/B Planning And Installation Instructions preview
HAWA-Frontside 60/B
Brand: hawa Pages: 28
FOR-A MFR-4000 Operation Manual preview
MFR-4000
Brand: FOR-A Pages: 72
NXP Semiconductors TWR-SB0410-36EVB User Manual preview
TWR-SB0410-36EVB
Brand: NXP Semiconductors Pages: 26
Genie WONVR216P5 Quick Start Manual preview
WONVR216P5
Brand: Genie Pages: 15
Omega OMB-DAQBOARD-3000 Series User Manual preview
OMB-DAQBOARD-3000 Series
Brand: Omega Pages: 108
Altera DE2-70 User Manual preview
DE2-70
Brand: Altera Pages: 93
ADTRAN NetVanta 6355 PoE Installation Manual preview
NetVanta 6355 PoE
Brand: ADTRAN Pages: 46
Accom WSD/HDe Installation Procedure preview
WSD/HDe
Brand: Accom Pages: 15
Dolphin IBP-G4x16-2 User Manual preview
IBP-G4x16-2
Brand: Dolphin Pages: 9
TP-Link Archer MR500 User Manual preview
Archer MR500
Brand: TP-Link Pages: 110
Allied Telesis AT-8550/SP Series Installation Manual preview
AT-8550/SP Series
Brand: Allied Telesis Pages: 114
Belkin AC 1600 DB User Manual preview
AC 1600 DB
Brand: Belkin Pages: 57
Valcom VIP-822A Quick Start Manual preview
VIP-822A
Brand: Valcom Pages: 4
1&1 Homeserver+ Quick Start Manual preview
Homeserver+
Brand: 1&1 Pages: 32
Sparklan WNFB-265AXI(BT) User Manual preview
WNFB-265AXI(BT)
Brand: Sparklan Pages: 14
Disc Makers Reflex10 User Manual preview
Reflex10
Brand: Disc Makers Pages: 38
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12

Brands by name

Popular brands

Load more brands